LDX-028A Full CNC servo TCT saw blade double grinding head side grinding
machine manufacturers
How to choose the gear of the saw blade grinding machine:
1,Generally, for the gear with large modulus and large tooth width,
the grinding wheel with coarser grain size should be selected, the
linear speed, stroke speed and grinding amount of the grinding
wheel should be small, the number of strokes should be less, and
the grinding wheel should be trimmed more times
2,And increase the coolant flow rate to avoid grinding cracks; The
first few laps must pay attention to observe the current change.
3,When installing the grinding wheel, it is necessary to confirm
that it can be installed without difficulty by hand, and pay
attention to the gap between the aperture of the grinding wheel and
the clamping cover of the grinding wheel, otherwise the centrifugal
force of the grinding wheel will be generated, resulting in
eccentricity.
| Technical parameters: |
| Saw web machining diameter range:￠100-￠800mm |
| Saw web bore diameter: 12-220mm |
| Thickness of saw web (steel plate):1-7mm |
| Tooth pitch: 5-80mm |
| Front inclination angle, inclination angle: 5°-15° |
| Radial angle: 3°-15° |
| Operating speed: 18 teeth/min |
| Feeding stroke: 1-28mm (stepless variable speed) |
| Grinding wheel dimensions: 80*100*32mm |
| Grinding speed: 26m/s |
| Coolant pump flux: 501/min |
| Coolant cylinder volume: 90L |
| Total power: 4.3KW |
| Voltage: Three-phase 380v |
| Weight: 1,100KG |
| Outer diameter dimensions: 1.75*1.4*2.0mm |
| Technical characteristics: |
| An intuitive and simple whole Chinese operation interface is
matched with a large-sized touch screen, so the equipment is easier
to operate, and all preset procedures or self-compiled procedures
are more convenient to call; the servo tool setting device features
accurate positioning, so the product grinding accuracy is greatly
ensured. Due to the adoption of high-quality and high-accuracy
castings and machined parts, the service life of the equipment is
greatly prolonged, and the equipment is simple and easy to operate
and maintain; one person can operate many pieces of equipment at
the same time, so the production efficiency is greatly improved,
and the cost is reduced. |
