LDX-020B Factory Direct Sales Of Multiple Saws Saw Blade CNC Gear
Grinding Machine
Saw blade grinding machine can not change the original Angle:
1,If the saw blade of the alloy head saw blade production line is
not used immediately, it should be placed flat or suspended by
using the inner hole, and other items or feet can not be stacked on
the flat saw blade, and pay attention to moisture and rust
prevention.
2,When the saw blade is no longer sharp and the cutting surface is
rough, it must be re-polished in time. Grinding can not change the
original Angle, and destroy the dynamic balance.
3,Saw blade inner diameter correction, positioning hole processing,
etc., must be carried out by the manufacturer. If the processing is
poor, it will affect the use of the product, and may be dangerous,
reaming in principle can not exceed the original aperture 20mm, so
as not to affect the balance of stress.
| Technical Parameters: |
| Processing saw blade diameter range: ¢100-800mm |
| Saw blade aperture: ¢10-220mm |
| Saw blade thickness (steel plate): 1-7mm |
| Pitch: 7-100mm |
| Tooth surface angle: 5 degrees ~ +30 degrees |
| Tip back angle: 6-45 degrees |
| Left and right inclination of the tooth: tooth top / tooth surface
45 degrees |
| Sharpening stroke range: up to 25mm (adjustable) teeth / minute |
| Sharpening speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth / minute |
| Grinding wheel size (outer diameter x hole): (¢125mmx¢32mmX1mm) |
| Negative chamfer grinding: -27 degrees |
| Grinding head can rotate angle: 90 degrees and 180 degrees |
| Grinding wheel line speed: 26m / s |
| Coolant pump flow: 501/min |
| Cooling tank volume: 85L |
| Total power: 1.85 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 710KG |
| Mechanical size (length X width X height): 1500X1300X1800mm |
|
| Technical features: |
| This machine is designed in reference to the features of domestic
and foreign similar types, which absorbs and analyzes the
advantages of the same type and improves the functions to some
extent at the same time. |
|
| 1. Preset many groups of tooth types and one-key multifunctional
operation. |
2. Trapezoid flat teeth can be finished at a time, features CNC
grinding and arbitrary tooth types, and can improve the efficiency
by 3 times; due to the adoption of improved tooth extraction
operation, the accuracy is improved, and the service life is
prolonged.
|
