LDX-020B Custom woodworking TCT circular saw blade front and rear
Angle grinding mac
What do you need to pay attention to when maintaining the gear
grinding machine:
1,Maintenance of the hydraulic system For the maintenance of the
hydraulic system, when the machine tool is used for a period of
time, the viscosity and other performance indicators of the
hydraulic oil will be affected, the cleanliness of the oil will
also decline, and the wear and tear of some relatively
sophisticated hydraulic valves will have a significant negative
effect, so the hydraulic oil should be precipitate and filtered
once in a month or so, and replaced once in three months. This can
improve the service life of the hydraulic components, while the
solenoid valve, pressure valve, throttle valve, relief valve and
pressure relay to do a good job of inspection, especially in the
case of the pressure gauge jitter more than ±0.5×105Pa must stop
using, clean the valve core with clean gasoline, so that it can
work normally.
2,Electrical system maintenance Electrical system is mainly a
number of control components, such as relay output, input
interface, electrical box module, cable floor immersion
maintenance, to regularly check these components, cable as far as
possible to take elevated wiring, do not fall, to avoid other
signal interruption.
3,The maintenance of the mechanical mechanism is mainly whether the
bearing load accuracy meets the requirements, whether the
lubrication of each lubrication part is in place, and try to avoid
the gear burn at the high-speed running gear, and the improper
lubrication of the guide rail makes the guide rail strain and other
phenomena.
| Main Technical Parameters : |
| Range of external diameter of processing:￠200-￠1200mm |
| Inner bore of saw blade:￠10-220mm |
| Thickness of saw web (steel plate):1-12mm |
| Pitch range:7-100mm |
| Tooth face angle:5°~+30° |
| Tooth top dorsal angle:6-45° |
| Tooth left/right gradient: Tooth top/tooth face 45° |
| Cutter grinding stroke range: Max. 25mm (adjustable) teeth/min |
| Grinding speed:0.5-6mm/s |
| Working speed: Max. 20 teeth/min |
| Grinding wheel dimensions (outer diameter * bore):
(￠125mm*￠32mm*1mm) |
| Negative chamfer grinding: -27° |
| Grinding head rotation angle: 90° and 180°Grinding speed: 26m/s |
| Coolant pump flux:501/min |
| Coolant cylinder volume: 85L |
| Total power: 2.2KW |
| Voltage:three-phase 380v |
| Total weight of equipment:800KG |
| Appearance(Long*Width*Height):1500X1200X1800mm |
| Technical features: |
| This machine is designed in reference to the features of domestic
and foreign similar types, which absorbs and analyzes the
advantages of the same type and improves the functions to some
extent at the same time. |
| 1. Preset many groups of tooth types and one-key multifunctional
operation. |
| 2. Trapezoid flat teeth can be finished at a time, features CNC
grinding and arbitrary tooth types, and can improve the efficiency
by 3 times; due to the adoption of improved tooth extraction
operation, the accuracy is improved, and the service life is
prolonged. |
