LDX-026 Automatic circular saw blade grinding machine
Automatic saw blade
grinding machine alloy saw blade rust factors:
1,In general, carbide saw blades should be coated with anti-rust
oil when not in use, placed in a ventilated, dry place, packaging
can not be damaged, it is best to store on a wooden shelf.
2,The factors that lead to the rust of the saw blade are usually:
the packaging is damaged, the place is wet, and it is easy to
contact the cemented carbide saw blade from the damaged entrance to
produce water mist, resulting in oxidation.
3,It may also be because in the place where the saw blade is
stored, the liquid seeps into the inside of the saw blade
packaging, causing oxidation, which leads to rust.
4,Therefore, when we do not use the saw blade, we must pay
attention to the location of the placement, and must be kept
ventilated and dry.
| Technical parameters: |
| Processing saw blade diameter range: ￠500- ￠ 2200mm |
| Saw blade aperture: ￠ 10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-120mm |
| Tooth surface angle: 5 degrees to+30 degrees |
| Tooth top back angle: 6-45 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 45
degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠32mmX2mm) |
| Negative chamfer grinding: -27 degrees |
| Grinding head rotatable angle: 90 degrees and 180 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 2.2 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 1200KG |
| Mechanical dimensions (length x width x height): 1900X1400X2000mm |
|
| Technical features: |
| The design of this machine refers to the characteristics of similar
domestic and foreign models, absorbs and analyzes the advantages of
the same type, and makes some functional improvements. This
equipment is specifically designed for grinding large alloy saw
blades. |
|
| 1. Pre set multiple sets of tooth profiles for one click
multifunctional operation. |
|
| 2. The flat teeth of the ladder can be completed in one go, with
CNC grinding and any tooth shape, which can increase efficiency by
three times; Improved gear extraction operation to improve accuracy
and extend service life. |
