LDX-026A Supply large TCT saw blade automatic grinding machine
Automatic saw blade grinding machine operation specifications You
know how much:
1,The operator must be familiar with the structural performance,
transmission principle and processing application program of the
equipment, and can operate independently after passing the
examination and obtaining the operation certificate.
2,It is forbidden to carry out tentative operation, and it is
forbidden to change speed during processing.
3,During the work, phonetic notes prevent coolant from mixing into
the drip pressure system and prevent cotton yarn and other waste
from falling into the machine.
Aluminum saw blade often lose teeth how to do?
1,The cutting speed of the cutter is not appropriate.
2,Lack of lubrication or cooling fluid, resulting in tooth
breakage.
3,The material is coming in too fast
4,You can observe whether the aluminum saw blade and material are
clamped.
5,The number of teeth and tooth spacing of the selected saw blade
are not appropriate. Plug your teeth and you'll break them.
| Technical parameters: |
| Processing saw blade diameter range: ￠500- ￠ 2200mm |
| Saw blade aperture: ￠ 10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-120mm |
| Tooth surface angle: 5 degrees to+30 degrees |
| Tooth top back angle: 6-45 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 45
degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠32mmX2mm) |
| Negative chamfer grinding: -27 degrees |
| Grinding head rotatable angle: 90 degrees and 180 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 2.2 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 1200KG |
| Mechanical dimensions (length x width x height): 1900X1400X2000mm |
| Technical features: |
| The design of this machine refers to the characteristics of similar
domestic and foreign models, absorbs and analyzes the advantages of
the same type, and makes some functional improvements. This
equipment is specifically designed for grinding large alloy saw
blades. |
| 1. Pre set multiple sets of tooth profiles for one click
multifunctional operation. |
| 2. The flat teeth of the ladder can be completed in one go, with
CNC grinding and any tooth shape, which can increase efficiency by
three times; Improved gear extraction operation to improve accuracy
and extend service life. |
