LDX-028A Three-Axis Fully CNC Saw Blade Double Grinding Head Side
Gear Grinding Machine
Double grinding head side Angle gear grinding machine features:
1,TCT saw blade side front Angle and side back Angle detection. Due
to the influence of many factors of the above process or matrix,
many people choose the table when detecting the side front Angle,
and the detection side front Angle is subject to the change of the
alloy repuller groove Angle, or the change of the alloy length
value.
2,When the deformation of the matrix is added, or it is still not
in the center garden, and the side front Angle is measured by the
point surface contact table, it is only a rough reference value,
not an absolute value.
3,The rear side Angle is affected by the diameter of A and B sides
of the grinding wheel. The five different changes of the grinding
center line are in essence only a reference value, and rigorous
detection still needs to project the most accurate video camera.
The method of ensuring the symmetry of the tooth shape of the saw
blade in the grinding process of the woodworking alloy saw blade
grinding machine can be summarized as the following key steps:
1,Ensure that the grinding machine used is suitable for the
grinding needs of alloy saw blades, with stable grinding
performance and accurate adjustment function.
2,Before you start grinding, check the saw blade carefully to make
sure it is not damaged, deformed or worn unevenly.
3,Position the grinding machine in the center, support the handle
with the flat material, and place the side of the saw blade on the
grinding stone. Make sure the saw blade is perpendicular to the
sharpening stone and carefully adjust the side Angle so that it
remains stable.
4,Place the top of the saw blade on the grinding stone, keeping the
vertical Angle of the saw blade and the surface of the grinding
stone. By adjusting the handle or related mechanism of the gear
grinding machine, ensure that the Angle of each tooth tip is
consistent.
| Technical parameters: |
| Saw web machining diameter range:￠100-￠800mm |
| Saw web bore diameter: 12-220mm |
| Thickness of saw web (steel plate):1-7mm |
| Tooth pitch: 5-80mm |
| Front inclination angle, inclination angle: 5°-15° |
| Radial angle: 3°-15° |
| Operating speed: 18 teeth/min |
| Feeding stroke: 1-28mm (stepless variable speed) |
| Grinding wheel dimensions: 80*100*32mm |
| Grinding speed: 26m/s |
| Coolant pump flux: 501/min |
| Coolant cylinder volume: 90L |
| Total power: 4.3KW |
| Voltage: Three-phase 380v |
| Weight: 1,100KG |
| Outer diameter dimensions: 1.75*1.4*2.0mm |
| Technical characteristics: |
An intuitive and simple whole Chinese operation interface is
matched with a large-sized touch screen, so the equipment is easier
to operate, and all preset procedures or self-compiled procedures
are more convenient to call; the servo tool setting device features
accurate positioning, so the product grinding accuracy is greatly
ensured. Due to the adoption of high-quality and high-accuracy
castings and machined parts, the service life of the equipment is
greatly prolonged, and the equipment is simple and easy to operate
and maintain; one person can operate many pieces of equipment at
the same time, so the production efficiency is greatly improved,
and the cost is reduced.
|
