LDX-026A 300MM-1600MM Diameter Large Circular Saw Blade Three-Axis
CNC Saw Blade Grinding Machine
TCT circular saw
blade grinding machine customized saw blade precautions:
1,Saw blade diameter This is very simple and can be designed
according to different sizes of materials. Saws of different sizes
of materials must use the saw blade size corresponding to each
other.
2,What kind of material should be used when the saw blade is
customized, which needs to be judged according to the material to
be cut, such as: high-speed steel, cemented carbide or cold saw
blades, saw blades also need to be customized according to
different materials.
3,The equipment largely determines the use of the saw blade, so
when customizing the saw blade, it is necessary to explain what
kind of equipment to use, so as to improve the corresponding
efficiency when making the saw blade.
Saw blade grinding machine operation:
1,Clamp the saw blade to be sharpened into the sharpening fixture,
and adjust the clamping force so that the saw blade will not be
damaged when the fixture grips the saw blade.
2,Determine the sharpening direction of the saw blade grinding
machine and turn the front of the grinding wheel towards the
sharpening edge.
3,Turn on the power switch, start the saw blade grinding machine,
and the grinding wheel starts to rotate.
4,Insert the sharpening fixture into the sharpening interface of
the sharpening blade machine, and adjust the Angle and height of
the sharpening fixture to achieve the best Angle and depth of the
sharpening blade.
5,Start the grinding operation, push the grinding fixture forward,
when the saw blade grinding is finished, stop the grinding
operation, turn off the power switch.
| Technical parameters: |
| Processing saw blade diameter range: ￠300- ￠ 1800mm |
| Saw blade aperture: ￠ 10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-120mm |
| Tooth surface angle: 5 degrees to+30 degrees |
| Tooth top back angle: 6-45 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 45
degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠32mmX1mm) |
| Negative chamfer grinding: -27 degrees |
| Grinding head rotatable angle: 90 degrees and 180 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 2.2 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 1200KG |
| Mechanical dimensions (length x width x height): 1800X1400X1800mm |
|
| Technical features: |
| The design of this machine refers to the characteristics of similar
domestic and foreign models, absorbs and analyzes the advantages of
the same type, and makes some functional improvements. This
equipment is specifically designed for grinding large alloy saw
blades. |
|
| 1. Pre set multiple sets of tooth profiles for one click
multifunctional operation. |
|
2. The flat teeth of the ladder can be completed in one go, with
CNC grinding and any tooth shape, which can increase efficiency by
three times; Improved gear extraction operation to improve accuracy
and extend service life.
|
