LDX-020B Fully CNC circular saw blade servo saw blade gear grinding
machine manufacturer wholesale
Saw blade tooth number and tooth shape:
1,The number of teeth and shape of teeth must be specified when the
circular saw blade is customized.
2,Orders require multiple confirmations. If the number or shape of
teeth is not right, it is easy to lose teeth or break teeth when
sawing, and even cannot be used.
3,Saw blades are widely used in daily life, and there are many
types, but the standard, scale and material of saw blades can also
be customized.
Precautions and methods of grinding:
1,It is very important to repair the blade in time when the blade
wear reaches 0.2mm, because the blade passivated at work, due to
the increase of resistance, it is easy to cause the saw blade
jashing, increase the load of the motor, and cause damage to the
saw blade and the machine.
2,In the passivation, there are the following circumstances,
carbide saw blades need to be trimmed in time a) sawing quality no
longer meets the requirements. b) When the energy consumption of
the sawing machine increases significantly. c) When the edge of the
cutting material has an obvious burst.
3,d) When the blade wear of the saw alloy reaches 0.2mm, it is very
important to repair it in time, because the saw blade with the edge
passivation is easy to cause the saw blade dither, increase the
load of the motor, and cause damage to the saw blade and the
machine.
| Main Technical Parameters : |
| Range of external diameter of processing:￠200-￠1200mm |
| Inner bore of saw blade:￠10-220mm |
| Thickness of saw web (steel plate):1-12mm |
| Pitch range:7-100mm |
| Tooth face angle:5°~+30° |
| Tooth top dorsal angle:6-45° |
| Tooth left/right gradient: Tooth top/tooth face 45° |
| Cutter grinding stroke range: Max. 25mm (adjustable) teeth/min |
| Grinding speed:0.5-6mm/s |
| Working speed: Max. 20 teeth/min |
| Grinding wheel dimensions (outer diameter * bore):
(￠125mm*￠32mm*1mm) |
| Negative chamfer grinding: -27° |
| Grinding head rotation angle: 90° and 180° |
| Grinding speed: 26m/s |
| Coolant pump flux:501/min |
| Coolant cylinder volume: 85L |
| Total power: 2.2KW |
| Voltage:three-phase 380v |
| Total weight of equipment:800KG |
| Appearance(Long*Width*Height):1500X1200X1800mm |
| Technical features: |
| This machine is designed in reference to the features of domestic
and foreign similar types, which absorbs and analyzes the
advantages of the same type and improves the functions to some
extent at the same time. |
| 1. Preset many groups of tooth types and one-key multifunctional
operation. |
| 2. Trapezoid flat teeth can be finished at a time, features CNC
grinding and arbitrary tooth types, and can improve the efficiency
by 3 times; due to the adoption of improved tooth extraction
operation, the accuracy is improved, and the service life is
prolonged. |
