LDX-028A Full CNC servo double grinding head side sharpening
machine factory direct sales
How should alloy saw blade be maintained:
1,Generally speaking, if the saw blade is not used immediately, it
should be placed flat or hung up with the inner hole, remember that
the saw blade can not be placed on the items or feet, pay attention
to moisture and corrosion prevention. At the same time, it is also
necessary that if the saw blade is not sharp enough, it needs to be
polished, and the original Angle cannot be changed in the process
of grinding. If the processing is poor, it will affect the use of
the product, resulting in the occurrence of danger.
2,Whether it is the saw blade factory or the storage of the alloy
saw blade after use, attention should be paid to the saw blade
moisture-proof and rust prevention, if not used immediately, it
should be placed flat or use the inner hole to hang it up, and
other items or feet can not be stacked on the flat alloy saw blade.
In use, if it is no longer sharp and the cutting surface is rough,
it must be re-polished in time, and the grinding can not change the
original Angle and destroy the dynamic balance. Saw blade inner
diameter correction, positioning hole processing, etc., must be
carried out by the saw blade factory.
3,In principle, the saw blade reaming space can not exceed the
original aperture 20mm, so as not to affect the balance of stress,
and alloy grinding wheel is best to choose diamond saw blade. Metal
bonded diamond grinding wheel not only has high bonding strength,
good wear resistance, low wear and long life, low grinding cost,
and can bear large loads. But the fly in the ointment is its
sharpness is poor, easy to blockage.
4,In fact, we also need to pay attention to be sure to place the
alloy saw blade in a suitable environment, which can effectively
ensure the stability of the performance of the product, bring us
great benefits and maintain the stability of the performance.
| Technical parameters: |
| Saw web machining diameter range:￠100-￠800mm |
| Saw web bore diameter: 12-220mm |
| Thickness of saw web (steel plate):1-7mm |
| Tooth pitch: 5-80mm |
| Front inclination angle, inclination angle: 5°-15° |
| Radial angle: 3°-15° |
| Operating speed: 18 teeth/min |
| Feeding stroke: 1-28mm (stepless variable speed) |
| Grinding wheel dimensions: 80*100*32mm |
| Grinding speed: 26m/s |
| Coolant pump flux: 501/min |
| Coolant cylinder volume: 90L |
| Total power: 4.3KW |
| Voltage: Three-phase 380v |
| Weight: 1,100KG |
| Outer diameter dimensions: 1.75*1.4*2.0mm |
| Technical characteristics: |
An intuitive and simple whole Chinese operation interface is
matched with a large-sized touch screen, so the equipment is easier
to operate, and all preset procedures or self-compiled procedures
are more convenient to call; the servo tool setting device features
accurate positioning, so the product grinding accuracy is greatly
ensured. Due to the adoption of high-quality and high-accuracy
castings and machined parts, the service life of the equipment is
greatly prolonged, and the equipment is simple and easy to operate
and maintain; one person can operate many pieces of equipment at
the same time, so the production efficiency is greatly improved,
and the cost is reduced.
|
